MULTITOOL BELT AND DISC GRINDING ATTACHMENT, 1220X100MM, 178MM DISC

The Multitool is a renowned, Australian designed belt grinding attachment which can be used on most bench grinders. The technology replaces the grinding wheel and converts a traditional grinder into a sophisticated work station ideal for sanding, grinding, sharpening, shaping, polishing and refinishing.
\n

• EFFICIENCY - Superior performance and a user friendly, toolless belt change in under 5 seconds.\n
• VERSATILITY - Grinding, sanding or polishing in 4 positions on rubber contact wheel, platen, disc or free strapping. The unit can also be swivelled vertically or any position in between.\n
• ACCURATE TRACKING - The running position of the belt is simple to adjust and it stays there, allowing for finishing into sharp corners.\n
• QUALITY CONSTRUCTION - Robust, maintenance free with sealed ball bearings, hardened and ground essential components and zinc plating.\n
• 3 YEAR WARRANTY - Against faulty materials and workmanship, even when used commercially.\n
  \n \n
  \n
  • 48" x 4" wide (1220 x 100mm) belt.\n
  • 7" (178mm) diameter disc.\n
  • 3 1/2" (89mm) diameter rubber contact wheel.\n
  • 5 1/2" (140mm) diameter drive wheel.\n
  • The 484 suits most popular 8" bench grinders with a screw mounted wheel guard and a minimum of 1 HP.\n
  • Suits shaft sizes of 5/8" and 1/2". A steel bush is supplied to adapt the drive wheel to 1/2".\n
  • Fitting Kit supplied.\n
  • NOTE: This is an attachment only.\n